Go to our website »

« Go back to job listings

Engineer, Machining & Fabrication

Location: Lewiston, ME

Type: Full Time

Min. Experience: Mid Level

Elmet Technologies is a leading premium supplier of the technology metals tungsten, molybdenum, tantalum and niobium and high-performance ceramics. With innovativeness, a clear commitment to quality, and extensive technological expertise we work side by side with our customers along the entire value-creation chain, supporting them as an expert partner in development and solution creation. We’ve been around for almost 100 years and are gearing up for more growth.  

We have an opening at our Lewiston, Maine facility for a Precision Machining & Fabrication Process Engineer. This person will be responsible for the development, oversight and improvement of all processes within our machining & fabrication product line, ensuring that all processes meet expected safety, quality and productivity standards.  

Job Duties Include, but not limited to:
  • Document and oversee the manufacturing process for new process introduction. Manage the full manufacturing cycle of  POCs, CFTs, FAIs and pilot runs to establish process control, capability and material yields. 
  • Define, measure, evaluate, implement & confirm manufacturing methods, materials, machinery, measurement systems, maintenance, and functional layout. Includes engineering routes, BOMs, and detailed manufacturing instructions. Selecting strategy, cutting tools, designing work-holding, and form tooling. Train and condition WRT new methods, analysis of variation, MSA, and inspection strategies. 
  • Implement and manage daily progress of the process development cycle for machined and fabricated new part launches to assure quality. E.g. Define, design, configure, implement, and confirm.
  • Analyzes workflow and equipment layout, production processes and machining requirements for products.
  • Utilize data analysis to monitor process performance and drive continuous improvement initiatives
  • In conjunction with quality control and quality assurance, resolution to nonconforming material issues, customer complaints, complete and implement corrective and preventative action measures, perform FMEA or other analyses to support all quality initiatives.
  • Provide technical support to both internal and external customers to define product/process requirements or troubleshoot existing materials, applications or processes.
Requirements:
  • Bachelor’s degree or associate degree in mechanical engineering combined with equivalent related work experience in a Mechanical or manufacturing technology role.
  • 3 +  years of experience in a similar or related machining environment
  • Knowledge of GD&T to precisely define part geometry, tolerances, and design intent. Using concepts like datums, feature control frames, and material condition modifiers.
  • Knowledge of CNC machining, multi-axis (5-axis) machining, and lathe manufacturing processes.
  • Proficiency in CAD software (e.g., Solidworks, Inventor, AutoCAD, Mechanical Desktop)
  • Business needs and trade compliance requirements mandate that this position be held by a U.S. Citizen or U.S. Permanent Resident.
  • Proficient using ERP software and Microsoft Office Products
Preferred:
  • Experience with Lean Manufacturing, Six Sigma methodologies to optimize shop floor workflow. 
  • Proficient with data analysis software (e.g. Minitab, JMP, MS-Analysis Tool pack) 
  • Knowledge of machine code (G-code) to translate engineering details using CAM software. (e.g. Mastercam, VeriCut)
  • Experience with precision measuring tools to inspect parts, identifying defects, and  ensuring they meet specifications.
  • Experience with CMM (Coordinate Measuring Machine) precise inspection practices.
  • Knowledge of mill and lathe cutting tool key features and types, materials, coatings and applications.
  • Experience with fabrication technology processes to shape, cut, form, and assemble materials into functional products. Using methods like laser, sawing, press brakes, rolling, welding, and riveting. 
Elmet Technologies is an Equal Opportunity Employer supporting diversity in all our business practices.


« Go back to job listings

Apply for this Position
* Required fields
First name*
Last name*
Email address*
Location
Phone number*
Resume*

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or paste resume

Paste your resume here or attach resume file

The following questions are entirely optional.
To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Gender
Race/Ethnicity
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status
I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER
Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:
YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST
NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST
I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Name Date
Human Check*
Social recruiting and Applicant Tracking System